Used with pre-manufactured or mortar shower pans with point drain. Covers 25 square feet or less – recommended sizes of shower pans are 5′ x 5′ or 4′ x 6′. Floor height within the shower area is recessed 11/16″ inch and is limited by the height of the floor joists. Brackets are made of 16 gauge galvanized steel. Manufactured in Colorado, USA.

Used with pre-manufactured or mortar shower pans with a linear drain. One joist bay is recessed 1”  below the top of the floor joists to accommodate the depth of the linear drain body.  The rest of the shower pan area is recessed 11/16” which is limited by the height of the floor joists. Joist orientation must be considered since the drain body will always be parallel to the joists. Covers 25 square feet or less – recommended sizes of shower pans are 5′ x 5′ or 4′ x 6′. Brackets are made of 16 gauge galvanized steel. Manufactured in Colorado, USA.

Used with pre-manufactured or mortar shower pans with a linear drain. Designed for linear drain installations when the drain cannot be installed at the back wall or if a drain at the entry is desired. The entry cutout in plywood subfloor for the linear drain is recessed 11/16” to account for linear drain depth. Suitable for linear drains up to 72” in length. Brackets are made of 16 gauge galvanized steel. Manufactured in Colorado, USA.